...
Here is a list of other turntable related error codes:
Lib USB Error Codes | ||
Error Code | Meaning | Notes |
---|---|---|
0 | All fine |
-3 | USB device not found | Can't find the USB chip for some reason |
-4 | Unable to open device | This is similar to -3 |
-5 | Unable to claim device | Most likely there's another FTDI chip device being used. Make sure you use Shutter Stream version 5.0 or higher. |
-6 | Reset failed | This could indicate a USB hardware failure. Make sure the table if powered from a clean power source. |
-7 | Set baud rate failed | Most likely USB chip has gone bad. |
-8 | Get product description failed | Should never have to deal with this error. |
-9 | Get serial number failed | Should never have to deal with this error. |
-12 | libusb_get_device_list() failed | Potential indication of faulty chip |
-13 | libusb_get_device_descriptor() failed | Potential indication of faulty chip |
...
Content by Label | ||||||||
---|---|---|---|---|---|---|---|---|
|